Most “wooden” flooring is a thin wear layer glued over MDF or plywood. Ours isn’t. Every plank is one piece of solid hardwood, top to bottom, so it can be sanded and re-finished again and again, and lasts for generations rather than years.
Pick the timber and the plank size that suit the room. Every board is solid hardwood, milled and finished to order.
Dense, golden and naturally durable, the premium choice, ages beautifully and resists moisture.
Light, hard-wearing and classic; takes stains cleanly for a modern or traditional look.
Deep, rich brown with dramatic grain, a warm, contemporary floor.
Reddish-brown, fine and stable, a warm classic hardwood.
Width, length and thickness milled to your specification, narrow strip to wide plank.
Natural oil, matte or satin lacquer, pre-finished or supplied raw to finish on site.
Our tongue-and-groove is cut to lock each board firmly into the next, a snug, even fit that keeps the floor flat, closes the gaps and stops planks lifting or moving underfoot.
Because it’s machined into solid wood, the joint is strong enough to take up and re-lay, not a fragile clip pressed into board.
Have a particular look in mind, or a joint profile that’s standard in your country? Tell us. Send the plank size, the wood and the tongue-and-groove design you use, and we’ll mill the flooring to match it exactly.
Flooring lives with foot traffic and changing humidity, so we kiln-dry and season the timber before milling. That’s what keeps a solid floor flat and stable rather than cupping or gapping a season later.
The same wood runs room to room for a continuous, matched floor, bedroom, living room and dining in one grain and tone.
Every board is milled to the same thickness and tolerance in our own factory, so it lays flat and even across a whole room, one house or a whole project. Grain and tone are sorted for a matched floor.
Sealed and, on request, borer and termite treated, worth doing for humid climates where cheaper floors don’t last.
As the manufacturer, we supply the same solid-wood flooring for one room or an entire project, delivered across the country on proper GST invoicing.
Direct to homeowners and their designers, the wood, plank size and finish to suit the space.
Repeatable flooring specs at volume for villas, hotels and residential projects, on schedule.
Trade pricing and margins for flooring retailers and studios reselling under their own name.
Sample boards to approve the wood, tone and finish before you commit to the full order.
Proper tax invoices and transport documentation for homeowners and business buyers.
Packed and delivered to your city, ready for your fitter to lay.
The thing that makes or breaks an imported wooden floor is moisture. We kiln-dry every board to a low, stable level and machine tight, consistent profiles, so the floor lands dry, locks together cleanly and stays flat once it’s laid.
Boards kiln-dried to a low, even moisture so they don’t cup, gap or shrink when they reach a drier or more humid country.
Profiles machined to consistent tolerance so boards lock cleanly and lay fast on site, container after container.
Bundled by length and grade and film-wrapped, so boards arrive dry, sorted and ready to lay.
Solid hardwood treated so the floor passes phytosanitary inspection at destination.
Commercial invoice, packing list, HS codes, certificate of origin and phytosanitary paperwork prepared correctly first time.
Heat-treated packaging that clears plant quarantine without fumigation delays.
A wood, a size and an area are enough to price it. Send us the following and we’ll come back with a recommendation and a quotation.
Teak, oak, walnut, mahogany or another timber, and the tone, natural, matte or satin.
Width, length and thickness, or ask us to recommend the right board for the room.
Our standard joint, or a T&G profile used in your country, send the detail.
The floor area (m² or sq ft), and where it’s going, a city in India or an export port.
It is 100% solid wood, every plank is one piece of solid hardwood through the full thickness. There is no MDF or plywood backing and no thin veneer wear layer. That’s what lets it be sanded and re-finished over a lifetime.
Teak, oak, walnut, mahogany and other hardwoods, in the plank width, length and thickness you specify, from narrow strip to wide plank, finished natural, matte or satin.
Yes. Our standard tongue-and-groove is milled to lock the boards tight. If you have a particular design or a T&G profile that’s standard where you are, send us the detail and we’ll mill the flooring to match it exactly.
Yes, exporting from here to your country is straightforward. The flooring is kiln-dried, treated and ISPM-15 packed, with full export documentation, so it clears customs and is ready to lay on arrival. We also ship mixed-item containers and sample orders.
Yes, across India to homeowners and their designers, to architects and developers at project volume, and to dealers at trade pricing, all on proper GST invoicing. Being the manufacturer, the pricing is factory-direct either way.
Tell us the wood, the plank size, the tongue-and-groove profile and where it’s going, a home in India or an export order, and we’ll recommend a floor, a specification and a quotation.
